ETC seatpost bolt knurled

ETC Semi Sealed Bottom Bracket Cartridge

Semi sealed square tapered cartridge bottom bracket with steel crank bolts. Available in a selection of sizes.

ETC Superlight Brake Rotor Disc

ONE23 Superlight Disc Brake RotorAvailable in 160mm (97g)/180mm (113g)/203mm (145g)6 Bolt Fitting International Standard .

Weldtite Red Teflon Grease 3 Kg

Bike Grease with Teflon,High lubricity and low friction,3kg Tin.

DMR Sect Seat Clamp

Products under the Sect group are all brand new for 2013. They are completely rider designed and represent the realist dirtbike products around.

ISM PR1.0 Performance Recreation Saddle

The PR 1.0 is set to reset your expectations of comfort.

TRP T925 Aero Brake

The new TRP T925 aero brake set is designed to reduce drag for maximum aerodynamic efficiency. The T925 brakes features optimized front and rear calipers which allow the front to be mounted behind the fork out of the wind for superior aero efficiency.

TRP T925.1R Aero Brake

Minimize frontal area,Reduce turbulence,Eliminate drag,These phrases all target a single objective: Aerodynamic Efficiency,. TRP’s engineers had these concepts in mind when designing the T925 Brake System.

Tektro T731F - Direct Mount Front Caliper Brake

Aerodynomic for Road or TT BikeDirect mount designedLight weight design,Quick release mechanism,For front wheel,.SpecificationSystem Dual Pivot Caliper Brake System,Material Forged aluminum arms,Pads P422 adjustable angle cartridge pads,Dimension 24-36 mm,Weight 180 grams / wheel,.

Tektro Dorado Mount / Brake Adaptor

D1 Adapter - suitable for Manitou Dorado forkMounts a Post Mount caliper onto a Dorado fork with a 180 rotor or rear brake with a 160mm rotor,Adapter and caliper mounting bolts included .

Tektro FX15.12.U Nutted Brake Pads for BMX U-Brakes - Pair

SpecificationNutted pads,55mm long,Angle adjustable,.

TRP T922.1 Caliper Brake

The T922 and T920 braking system was designed specifically for time trial and triathlon applications where aerodynamics are as critical as endurance. These brakes can be found on the world’s most cutting edge time trial machines due to their side or center pull cable routing and unique aerodynamic edge profile.

ETC Resin Road Pedals Inc Toe Clip/Strap

ETC's Classic Resin Road Pedals with toe clips and straps. Key Features:Resin body,Plastic toe clips,Nylon straps,9/16" axle.

ISM PN 1.0 Performance Narrow Saddle

The PN 1.0 is new for 2016, and ready to take on any road.

ISM PN 1.1 Performance Narrow Saddle

People have been gushing about the ISM Attack since its introduction in 2013. As we know, however, one saddle doesn't work for everyone.

ISM PL 1.0 Performance Long Saddle

New for 2016, we introduce the PL 1.0.

ISM PL 1.1 Performance Long Saddle

The 2016 PL 1.1 is a new version of our very popular Prologue saddle, with updated racing graphics.

ISM PS 1.0 Performance Short Saddle

New for 2016, the PS 1.0 is a fresh look for the Time Trial saddle.

ISM PR 2.0 Performance Recreation Saddle

The PR 2.0 fits into the Performance Recreation category - perfect for adding comfort to any bike.

ISM Comfort City Touring Saddle

Our original saddle. Inspired by the “morning routine”.

ISM Comfort Fitness Berkley Saddle

New for 2014, the Berkley was inspired by our Cruise saddle. It has a similar overall shape, but is narrower at the rear.

Effetto Mariposa Caffelatex Sealant - 250ml

Caffélatex is a truly innovative tyre sealant, successfully used on and off (MTB, cyclocross) road, for tubeless, tubular and inner-tube applications.CharacteristicsImproved formula (since January 2012):Thanks to the addition of microscopic silicate particles, Caffélatex now moves more slowly through holes, allowing the sealing ingredient more time to heal the puncture.

MET Parachute Full Face MTB Cycling Helmet

The lightest ASTM certified full face helmet in the worldTHE BEST LEVEL OF SAFETY IN ITS CLASSParachute is the trailblazer for a new category of helmets purpose-built for Enduro mountain biking. It combines the protection of a full face helmet with low weight, high ventilation and comfort.

A2Z Adapter P.M. to P.M. 160mm to 203mm

This brake adapter converts Post Mount 160mm to the larger 203mm Post Mount fitting.

A2Z Adapter I.S. to P.M. to keep 160mm

This brake adapter converts 160mm I.S.

A2Z Adapter P.M. to P.M. 160mm to 180mm

This brake adapter converts 160mm P.M.

A2Z Adapter P.M. to I.S. 160mm to 203mm

This brake adapter converts 160mm P.M.

Pro Bike Display Stand

Pro 3K Carbon Headset Spacer Set

Features:Carbon headset spacer set is the finishing touch to your bike build.Supplied as set of 4 pieces: 1 x 3 mm, 1 x 5 mm, 1 x 10 mm and 1 x 20 mm.

Pro Headset Expansion Nut for Carbon Steerer Tubes

Key Features:Headset expansion nut for carbon steerer tubes.,25mm long for 1 1/8" steerer tubes.

Pro Vibe LTD Monocoque UD Carbon Side Clamp Seatpost - 20 mm Layback - Di2

Features:The ultimate lightweight pro level full carbon monocoque seatpost as used by the top ProTeam professionals,Full one-piece T800 uni-directional carbon fibre monocoque construction produces a lightweight and stiff seatpost,Dual flat sections inside tube for increased strength and rigidity,Easy to use single side-bolt clamp design makes installation easier with more scope for fine tuning,Titanium bolts,Handy height-indicator on the rear of the tube for quick setup,Inserted CNC alloy V badge for distinctive Vibe look,In-line clamp design,Pack includes added clamps for larger carbon rails,Di2 internal battery compatible,Weight from 190 grams.

Pro LT 6061 Alloy 20 mm Layback Seatpost - 400 mm Length

Features:Great value 6061 alloy seatpost with easy to read size indicator,One-piece seatpost from 6061 alloy tube with a 3D forged head for increased strength and durability,Single-bolt 6061 forged aluminium seat clamp,Made from 6061 aluminium for high strength and excellent resistance to corrosion.

Pro Dropper Seatpost Protector

Features:With neoprene construction and a tough woven outer skin this is the ideal solution to protect your dropper seatpost,By keeping mud, dust, debris and stones away from the upper stantion of your post you can drastically decrease servicing costs and frequency,Easily and securely mounts to your saddle rails and post,Quick and simple to wash and very light.

Gusset B_stard Grips

As in the metal file used in engineering. The grip surface is knurled like its namesake.

ProGold Degreaser + Wash

Separates and Suspends Oils and Soils. Cleans grime, oil, and greases gently.

Token Chainset Hex Bolt

RSP Plummet Remote Dropper Stealth Seat Post

The Plummet seat post will change your riding style completely. You will be dropping your saddle on the fly and hitting technical sections faster than you ever have.

MRP TR Upper Chainguide

New co-molded "TR" upper guide with softer durometer interior for silent guidance.Fits:G3,,AMg V1,,AMg V2,,All 1x guides that feature full G3 upper guide..

FSA OS-99 CSI UD Carbon Stem

Features:3D forged and CNC machined from AL2014UD carbon weave skin applied through CSI process4 bolt sculpted AL2014 alloy carbon faceplateTitanium hardware±6°×80, 90, 100, 110, 120 or 130mm31.8mm handlebar clamp41mm fork clamp stack heightUD carbon finishColour graphics ooptions: Red, Grey126g (100mm).

RSP Braze-On Mech Clamp

Using this new clamp from RSP, quickly and easliy mount your Braze-On front derailleur to any standard frame.  Available in 3 sizes to cover nearly all bike models.

RSP Freeride MTB Stem

The RSP free ride stem is specifically targeted at the freeride, street rider. Using light 6061-T6 alloy, and designed to fit 31.